Skip to content

Novitech

Micron ILI Technology

  • Home
  • About
    • Campos EPC
    • Careers
    • News
  • Services
    • Data Analysis and Reporting
    • Engineering and Integrity Services
    • Field Services
    • Research and Development
  • ILI Technology
  • Contact

News

ILI Detection and Measurement of Elevated Stresses at Crack Locations

ILI Detection and Measurement of Elevated Stresses at Crack Locations

March 3, 2022March 3, 2022

 Novitech’s Micron IDD-SM® sensor technology is changing crack integrity management. This new methodology of stress measurement facilitates more accurate ranking of crack severity.  As shown below, the AMFL responses to circumferential stress corrosion cracking (CSCC) remains constant while the responses from the IDD-SM sensor technology clearly shows the increasing signal amplitudes as the applied bending […]

Novitech Debut’s Their New 8” Micron ILI® Crack Detection Tools at PPIM2022

February 2, 2022

Our Micron MFL based crack detection tools with dual geometry & IDD-SM modules have taken pipeline inspections to the next level.  Novitech’s industry leading AMFL tools can sample over 600x per square inch & our CMFL tools can sample over 1000x per square inch.  When coupled with dual Geometry & IDD-SM modules, a combined sampling […]

What sets Novitech Inc. apart from other ILI companies?

February 2, 2022

When using our technology, you can get more data from just one run, with the use of MFL + IDD to reliably discover cracks in the process of pipeline inspections. We are thrilled to announce that we have made it into the top 5 contenders at PPIM regarding innovation awards, and we ask that you […]

Novitech and Campos EPC Collaboration

February 2, 2022February 2, 2022

Novitech and Campos collaborate to make another PG&E project successful. Inspecting a very challenging 12 by 16” dual diameter 30 mile long line segment successfully, in just three days with three different tool versions, that included Geometry with IMU, AMFL with Geometry and IDD sensor systems, and CMFL with Geometry and IDD senor systems tool […]

2021 SGA Engineering Innovation Awards

November 11, 2021January 20, 2022

Xcel Energy and Novitech were one of the three finalists for the Southern Gas Association Engineering Innovation Award.

Novitech’s Version 10 Micron ILI Technology

Novitech’s Version 10 Micron ILI Technology

February 24, 2020July 17, 2020

Version 10 offers the best inspection capabilities in a single tool run.

Novitech’s Modular Micron ILI Technology

Novitech’s Modular Micron ILI Technology

February 22, 2020July 17, 2020

With our Patented Micron ILI Technology, Novitech has Ten standard tool configurations from Version 1 (Geometry), to Version 10 (A&CMFL with Geometry, IDD and IMU) sensor systems.

Novitech’s 16″ Micron CMFL Tool

Novitech’s 16″ Micron CMFL Tool

February 15, 2020July 17, 2020

Novitech Displays it new 16″ CMFL tool at PPIM in Houston. This state of the art CMFL tool has 1152 primary sensors and can used with AMFL, Geometry, IDD and IMU modules.

Detection and Sizing of Circumferential SCC Interacting with Girth Welds Using Novitech’s Micron ILI Technology

Detection and Sizing of Circumferential SCC Interacting with Girth Welds Using Novitech’s Micron ILI Technology

February 11, 2020July 17, 2020

Detecting Cracks interacting with girth welds is always difficult.

Novitech and Xcel Energy Present 2nd Paper on CSCC

Novitech and Xcel Energy Present 2nd Paper on CSCC

February 10, 2020January 20, 2022

Novitech and Xcel Energy present a 2nd paper on Circumferential Stress Corrosion Cracking at PPIM in Houston.

Posts navigation

Older posts

Novitech and Xcel Energy Present 2nd Paper on CSCC

Novitech News

  • ILI Detection and Measurement of Elevated Stresses at Crack Locations
  • Novitech Debut’s Their New 8” Micron ILI® Crack Detection Tools at PPIM2022
  • What sets Novitech Inc. apart from other ILI companies?
  • Novitech and Campos EPC Collaboration
  • 2021 SGA Engineering Innovation Awards

Tool Development and Analysis Center:
331 Cityview Blvd, Unit 1
Vaughan, Ontario
Canada L4H 3M3
Office:
Ron Thompson, Senior Vice President:
Phone: ( 647 )-527-7235
Guillermo Solano, P.Eng
Director of Integrity and Customer Services:
Phone: ( 416 )-580-8126
[email protected]

  • About
  • Modular Micron ILI Technology
  • Research and Development
  • Services
  • Careers
  • News

Subsidiary of Campos

Proud member of

NMSDC

Copyright © 2022 Novitech